Re: [AlbinVega] Digest Number 4436

[Nathan Wagner]

I'm replacing my cockpit locker covers. I still have the original fastening latch hardware, but I need to replace the old piano hinges. Any recommendations on suitable replacements?

Nathan
Damsel
Albion, California

 

[Trevykins]

See if you can find some without holes and drill to match - or you may go crazy trying to find something identical to the original swedsih stuff Sent from my “contract free” BlackBerry® smartphone on the WIND network.From: "\'Nathan Wagner\' wagnern@... [AlbinVega]" <AlbinVega@yahoogroups.com>
Sender: AlbinVega@yahoogroups.com
Date: Sun, 7 Sep 2014 19:15:41 -0600ReplyTo: AlbinVega@yahoogroups.com
Cc: <AlbinVega@yahoogroups.com>Subject: Re: [AlbinVega] Digest Number 4436
 











I\'m replacing my cockpit locker covers.  I still have the original fastening latch hardware, but I need to replace the old piano hinges.  Any recommendations on suitable replacements?

Nathan
Damsel
Albion, California

 

[pelagicasd]

Defender Marine stocks stainless piano hinge. You probably would have to fill the old holes and redrill but not that hard to do.                                                  WaltTo: AlbinVega@yahoogroups.comFrom: AlbinVega@yahoogroups.comDate: Mon, 8 Sep 2014 04:00:08 +0000Subject: Re: [AlbinVega] Digest Number 4436














 






















See if you can find some without holes and drill to match - or you may go crazy trying to find something identical to the original swedsih stuff Sent from my “contract free” BlackBerry® smartphone on the WIND network.From: "\'Nathan Wagner\' wagnern@... [AlbinVega]" <AlbinVega@yahoogroups.com>
Sender: AlbinVega@yahoogroups.com
Date: Sun, 7 Sep 2014 19:15:41 -0600ReplyTo: AlbinVega@yahoogroups.com
Cc: <AlbinVega@yahoogroups.com>Subject: Re: [AlbinVega] Digest Number 4436
 











I\'m replacing my cockpit locker covers.  I still have the original fastening latch hardware, but I need to replace the old piano hinges.  Any recommendations on suitable replacements?

Nathan
Damsel
Albion, California

 

[pjacobs55]

Hi Nathan,I filled all the piuano hinge screw holes (a great source of locker leaks) and replaced them with a pair of Heavy Duty Stainless Steel Shortside Offset Hinge Open Width: 2-1/2" Heavy Duty Stainless Steel Shortside Offset Hinge Op... Stainless Steel Shortside Offset Hinge Open Width =2-1/2" Pin length = 1-1/2" Offset = 3/8" Thickness=3/16" Pin View on www.marinepartdepot... Preview by Yahoo There are a whole lot of different hinges available here for a reasonable cost, and I find the quality to be very good.Peter.