I am a new owner of a 29 foot Ericson Sloop. Prior to this I have owned smaller boats where raising the mast is not difficult. The mast on the Ericson obviously is fairly long and heavy. How would one go about raising the mast? I know I can have a yard do it but I am the self sufficient type and would rather not spend the money if I don't have to.I figured I would use the jib halyard attached to a point on the bow. Put a 2x4 from the mast step out about 8 feet under the halyard to increase the pulling angle. Then have 2 lines, one to each side to control movement from side to side with one guy on this. Also another guy to get the lift started.Does this sound like it will work, is there more needed, or should I just have the yard do it with their crane. The mast weighs a couple hundred pounds and the last thing I need is for it to go over the side. Once it is up it would obviously stay up while the boat is on its mooring.Thanks