Questions About rollerfurling jibd

Status
Not open for further replies.
Nov 9, 2008
1,338
Pearson-O'Day 290 Portland Maine
Hull speed is not a fixed point in time and space. I think the amount of engery required (supplied by the wind) to make the boat go just a smidge faster might be 1/16 HP (for lack if really knowing the terms) when you are at 1/2 hull speed to 10 hp at full hull speed. A sailboat can go faster that the accepted formula dictates even on it's own but the ol' 1.34(SQRT LOL) gets you close enough that the average sailor takes no notice. My Lancer is a"limited" to 6.6 knot but we had it to 7.5: screaming along. Then I checked the currents in the bay and delated my ego. We were using a GPS which only accounts for ground speed. SO . . . we were actually at 5.5 knots which for an inexperienced crew on a GORGEOUS November day, we were doing quite well.

As far as the jib only . . . poppycock! A freshening breeze, about 18 knots, we raised the jib only (because EVEYBODYelse was doing it and we were the least experienced on the water) and FLEW up the coast to Jewell Island in no time flat. It works great.
 
Jan 22, 2008
8,050
Beneteau 323 Annapolis MD
Anyone have a site that will give you the wind speed for the previous day in a given location? The forecast said 15-20 with gusts to 25kt. I'd love to know what it actually was.
Start here: http://www.ndbc.noaa.gov/to_station.shtml to find your nearest site. I use the Thomas Point Light House off Annapolis. There is alot of graph info you can see if you click on the triangle at the top of a columnn. The wind vs air pressure is interesting to look at.
 
Status
Not open for further replies.