I noticed that my cockpit table was a bit loose and I had to retighten the big screws on both legs. That got me wondering if I should really remove it and re-bed it to make sure the seal with the deck is good.
For anyone who has removed the table on the 36 or 356, do the big screws in the support legs go into captive nuts/threaded holes, or do you have to access the nuts from inside the aft cabin?
Andy
For anyone who has removed the table on the 36 or 356, do the big screws in the support legs go into captive nuts/threaded holes, or do you have to access the nuts from inside the aft cabin?
Andy
