I have removed the ports, cleaned up all the framing, cut new plexiglass and am ready to reinstall. The original plexiglass framing is junk (the plastic/maybe used to be rubber insert I'm referring to, not the aluminum frame), to old and brittle to reuse, plus there is about a 3 inch gap between the ends at the bottom of the ports - did they do that on purpose for some reason it's the same on both sides.
I'm trying to find a replacement with nothing working so far after multiple trips to HD. I'm considering using rv/marine tape and silicone caulk (talking about aroung the plexi in the slot).
Had anyone redone their ports and found a good waterproof trim product that fits in the slot around the new plexi?
Thanks!
I'm trying to find a replacement with nothing working so far after multiple trips to HD. I'm considering using rv/marine tape and silicone caulk (talking about aroung the plexi in the slot).
Had anyone redone their ports and found a good waterproof trim product that fits in the slot around the new plexi?
Thanks!