Pointing and VMG
Alan has good advice and is usually right. That said, try to reduce drag by improving the bottom finish, i.e. hard finish racing bottom paint that can be wet sanded; fair in any imperfections such as at the typical hull to keel joint. Install a folding or feathering prop; don't let any type of prop spin in front of the rudder causing you to loose attached flow over the rudder. Get a decent book on sail trim and learn how each sail trim element works in concert with the next adjustment. Adjust your mast rake and mast bend for just enough weather helm to help you point; make sure the jib or Genoa has a fairly flat entry with maximum chord depth at about 45% and does not have an over tight leech cord or a hooked leach, which leads to early backwinding of the main; same concern for hooked leach on a mainsail, a flat leach promotes faster flow. There usually is a 'sweet spot' where the main and jib or Genoa are optimizing performance and any tighter trim will be detrimental. Note how many inches the Genoa is off the spreaders when you are at your best settings. Check your sailing angles for each tack against the compass as well as against the knot meter so you get a feel for your performance and crack off the jib sheet and mainsheet a little at a time when wave conditions demand a litle extra power. The quickest way to learn what's fast is to race against and with knowledgeable racers who usually will be happy to give advice though it might be after the race.Your description of your boat: deep keel & decent sails is a good starting point. Look at how other owners of the same model have maximized them for racing; headfoil system, backstay adjuster, boom vang, traveler improvements, etc.