Play in rudder

Nov 10, 2009
4
Bristol 35 Long Island Sound
Has anyone with either a Harbor 25 or Harbor 20 had to fix excessive play in the rudder. I understand that it might not have bearings and the shaft runs directly on the fiberglass. Any input would b appreciated
 
Nov 6, 2006
10,256
Hunter 34 Mandeville Louisiana
I am not familiar with that boat but typically the rudder shaft would run in plastic bushings that are pressed or sometimes glued in the fiberglass support. There will usually be a thrust bearing to take the vertical loads of the rudder. Nylon is not a good choice for the bushings because of swelling but stuff like Delrin and other engineered plastics can be fine. Ya might want to contact the Harbor 20 class association and see what others have done. good luck !
 
  • Like
Likes: jssailem