I have a plastic portlight on the starboard side of the hull in the aft berth. This was scuffed so badly when I bought the boat you could only see light and shadows through it.
Last year I figured it couldn't get any worse, so I lightly hit it with the buffer when polishing with Finesse-IT, and it made a big difference. Wasn't great, but I could make out boats and colors through it. Yesterday I was polishing the hull, and gave it a good heavy polish with t
Finesse-IT on a blue 3M pad at 1500 RPM, and it's perfectly crystal clear now!!!
:dance::dance:
Last year I figured it couldn't get any worse, so I lightly hit it with the buffer when polishing with Finesse-IT, and it made a big difference. Wasn't great, but I could make out boats and colors through it. Yesterday I was polishing the hull, and gave it a good heavy polish with t
Finesse-IT on a blue 3M pad at 1500 RPM, and it's perfectly crystal clear now!!!
:dance::dance: