Well, I did my rudder and it came out great! The peel away went on like icing a cake. There were a couple of hard places that dryed out on the edges but nothing a stiff metal wall scraper wouldn't handle. The paint residue left behind washed right off with my pressure washer. Clean! Right down to the barrier coat. I then started on the rest of the boat. Not quite as easy due to the curve of the boat, but not nearly as painful as sanding. The larger area created the challenge of applying just enough for the size of the paper. The stuff drys sort of quick if left uncovered, so you need to apply, then cover, then apply the next section. Just a note: The "wash down" leaves a bit of paint on the ground.