we recently acnhored our hunter 41 (2007) and cranked up the generator for the first time this season. It ran great, then I inadvertantly cut it off, and within a few seconds before it had shut down, cut it back on. The heat light came on and now won't go off. The water is circulating, the unit is full of antifreeze, the oil was checked and I have read the manual. anyone had this problem or know what I might do next.
panda 5 kw generator
- Thread starter mr. Kempsville
- Start date
no
I have a 2007- 4200 FP and not had that problem so check the connection
on sensor and you said first time.
Not good to not run it and even if don't need it should run it at least once
a month,service guy suggested run at least once a month with load on it
luke AC or water heater.
I have found FP to be very helpful when need help and have called a few times
with good help on phone.
Nick
I have a 2007- 4200 FP and not had that problem so check the connection
on sensor and you said first time.
Not good to not run it and even if don't need it should run it at least once
a month,service guy suggested run at least once a month with load on it
luke AC or water heater.
I have found FP to be very helpful when need help and have called a few times
with good help on phone.
Nick