B
Benny
A lot of sailors are running older engines with unknown amount of hours. Performing a compression test on diesel engines requires specialized tools. A simple test can give you an idea of your engine's condition. Start the engine and get it up to operating temperature, remove the oil fill cap and place the palm of your hand against the opening, you will feel air pushing against it; that is compression blow-by. Compression gases which escape the combustion chamber and flow into the crankcase. A small amount is normal but a strong flow is an indication of worn piston rings or thin diluted oil. Once a fair amount of compression blow-by is detected you may extend the life and performance of the engine by going to a thicker oil. Some additives or restorers likes STP can be used. That 30W oil recommended when the engine was new may not be the best for it now. A good multigrade oil with a restore additive can make an oldie purr a little longer.