Oday 26 Running Rigging

[mlindberg1]

Does anyone have a picture or drawing of where the jib sheets run? I have a large 140 to 150% jib. I run the sheets outside lifelines and shrouds. Is this the best way? There are a set of blocks basically inline with the non opening port light. I run the sheets outside everything, aft of the winches to blocks on tracks, then to the winches.

thanks
Mike

 

[Sunbird22358]

It sounds like you have the genoa sheets rigged correct. Blocks in-line with the non-opening ports are for the smaller, "working-jib" which was about 100% usually.

 

[Ward H]

Agree with Sunbird!