O'day 25 Halyard Lengths?

[jdratlif]

I need to replace the halyards on my boat and I do not have access to their lengths right now. I know that the jib and main halyard rope is 5/16" but I need the length overall dimensions. I have my halyards routed back to the cockpit so I am having a hard time finding this information posted. What do other people use? Also I am going to just use a 5/16 piece of rope for my topping lift. What should I use for a length with my topping lift?

Thanks for the help

 

[Scott On Eagles Wings]

get them right here

I ordered mine right here on this site. Type in your boat information and the way you run your halyards, the shakel and any other special request. I got mine last season they fit perfectly, were fairly priced and we are very happy with them and the service.

 

[RichBone]

I've got my lines led back to the cockpit. The stock lines were about 60'. I think I added 10'.

Rich

 

[Sunbird22358]

Is your 25 a K/CB or a Fin-keel?

Main Halyard (rope) 5/16” x 59’ (K/CB)
5/16” x 64’ (Keel)

Jib Halyard (rope) 5/16” x 60’4” (K/CB)
5/16” x 63’4” (Keel)

The above are the O'DAY specs (does not include extra to run halyards back to cockpit)

And for the topping lift:
Topping Lift (rope) ¼” x 31’ (K/CB)
¼” x 33’ (Keel)

 

[Shoaldrafter]

History Lesson

Is your 25 a K/CB or a Fin-keel?

Main Halyard (rope) 5/16” x 59’ (K/CB)
5/16” x 64’ (Keel)

Jib Halyard (rope) 5/16” x 60’4” (K/CB)
5/16” x 63’4” (Keel)

The above are the O'DAY specs (does not include extra to run halyards back to cockpit)

And for the topping lift:
Topping Lift (rope) ¼” x 31’ (K/CB)
¼” x 33’ (Keel)

----------------------------- // ---------------------------
So where does information like the above come from?

It just might come from Capt Herring, Commodore of this web site, see:

http://oday.sailboatowners.com/inde...id=257&cat_id=127&aid=7702&page=article&mn=25

Why is the page blurred? Because we never came up with an original copy. It was a copy of copy, posted as a reply to similar question.

So, if anyone has original, I know Capt Herring would be happy to update post.

Maybe if the new guys studied the archives and modification pages? Instead of asking to be spoon feed?

Ed K
O26