I may have the opportunity to get an oday 20. it does not have a trailer, but I just so happen to have a spare tandem axle aluminum trailer. what I don't have is the measurements to know if the keel will clear the axles. I am hoping somebody with one on a trailer can take 10 minutes and get me a couple of measurements??
seems to me the easiest way would be to measure from the ground to the hull at the back of the bunk, then from the ground to the back of the keel. subtract the ground to keel measurement and that will give you the depth that the boats sits in the trailer. It would be nice to measure the front also in case they aren't the same.
seems to me the easiest way would be to measure from the ground to the hull at the back of the bunk, then from the ground to the back of the keel. subtract the ground to keel measurement and that will give you the depth that the boats sits in the trailer. It would be nice to measure the front also in case they aren't the same.