O Day - 27 specifications needed.

[Donald G. Fulcher, Sr.]

I am currently rebuilding a 1976 O-Day-27 and would appreciate any information the reader can forward to me, through ODayOwners.com or directly to me at DaddyD@clis.com. I would particulary like to know the weight of the O-Day-27 MAST.I would like the readers recomendations on how to lift the MAST, for repairs.

 

[Donald G. Fulcher, Sr]

O-Day-27 bilge-pump needed

The O-Day-27 has a narrow and deep bilge hole ( 4"W x 10"D ). I would appreciate the readers forwarding through ODayOwners.com or directly to me, at DaddyD@clis.com , any sources of pumps or recomendations that would pump all the water from th bottom of the hole.

 

[Donald G. Fulcher, Sr.]

Need 1976 O-Day - 27 port-lights

Fellow O-Day owners, I would appreciate any information on where to purchase 1976 O-Day-27 port-lights, that would fit the original port holes cut by the manufacture. Please forward information through ODayOwners.com or directly to m at DaddyD@clis.com.

 

[Steve Fleischer]

27' O'day

http://www.drmarine.com/ have the ports +. I just bought a 1975 27'...I'd appreciate any info on specs/drawings, manual etc. that might turn up please.Is the deck/cabin top balsa cored?Thanks & good luck.steve

 

[TT]

Check the ODO site

Steve & Donald - you should find lots of info on the O'Day Owners Site - check thru the Archive Forums for relevant topics.Yes, the deck & cabin top are balsa cored.D & R Marine is one source for ODay stuff: the guy running it was apparently involved building ODays when they were built in Mass. Site address is <www.drmarine.com> Mast weighs 97 lbs± with shrouds & halyards removed but all other hardware attached. I'd ball-park it at c. 75 lbs stripped.