NMEA Cable Install on Hunter 30-2

Kurt K

.
Oct 20, 2024
2
Hunter 30-2 Ventura Harbor
Hello, new to the forum and looking to run a NMEA cable from the electrical control panel to the helm on an '89 Hunter 30-2. Wondering if anyone here has experience with this install? Any insights would be greatly appreciated.
 

jssailem

SBO Weather and Forecasting Forum Jim & John
Oct 22, 2014
22,076
CAL 35 Cruiser #21 moored EVERETT WA
Welcome to the forum Kurt. The H30-2 is a nice boat. Hunter often ran cables in conduits (wire chases) about the boat. I would suspect you can find access at the helm and follow the wires back to the control panel. NMEA cable comes in bulk form and has field attachable connectors.

A fiberglass rod wire fish should work neatly to move the cable through the conduit.
 
  • Like
Likes: Hello Below

Kurt K

.
Oct 20, 2024
2
Hunter 30-2 Ventura Harbor
Thank you, jssailem. I've located the conduit that runs from the control panel to the helm. Field attachable connectors will simplify things. Much appreciated.
 
  • Like
Likes: jssailem