Newport30: Halyards, Sewage tank and Hand pump

[ukrsindicat]

Hello, Gents(and ladies)

I am new owner N30MKI. She is a nice boat and for the money that I have paid for her, it is even nicer.

Still there is an array of things that will need to be done to her.
1. I am looking to replace both halyards on her. What are the length and width of standard halyard for N30?

2. I can't find the hand bilge pump on the boat. Where is it?

3. Where is the sewage tank? When water washes from the sink into the drain where does it go?

I appreciate all your help on this, friends! I will soon post pictures.

Yuriy

 

[Rick D]

Well, I hope this is two answers: you can determine halyard size and length by going to the rigging calculator on this site's store and you can get them right through here. As far as where the sink (gray) water goes, it goes into to the water via a through hull fitting.

 

[pogo2]

The haylard on my N30 is 7/16 ropeand wire, about 100' in length. the water from the sinks go overboard to the sea, the shower drains into the bilge. The hand pump for the bilge is the same pump you use for the refrig. there is a Y valve in the lazzarett forward, you have to get in the lazzy to switch it from fridge to bilge. I have a automatic bilge pump so I rarely switch it.
Capt. Al Duquette
s/v Mast Confusion 87 N30
Tonawanda, NY