Idaho greetings - brand new H260 owner - just towed up from CA this weekend (1,045 miles w/ 20mph crosswinds the last 200 - whoopa!) We are getting ready for covered winter storage.
Sails are usable but will be sent out for some repairs. Found our headstay foil extrusion is cracked and needs replacing. Thoughts/ideas on this job and a parts source?
Winterizing for a freezing climate? Obviously batteries, engine, cassette toilet, bilge and water system (pressurized). I ran the drinking water dry through the faucets. Is there a good way to drain the tank completely? Did not see a dump valve. Without I'm hesitant to run RV antifreeze through there. Also - bilge access - want to make sure its completely dry. Suggestions?
Sorry for the newbie questions - we come from a beach cat background. Have done a bunch of crewing on bigger boats but this is our first craft with "systems".
Thanks much! JT More
Sails are usable but will be sent out for some repairs. Found our headstay foil extrusion is cracked and needs replacing. Thoughts/ideas on this job and a parts source?
Winterizing for a freezing climate? Obviously batteries, engine, cassette toilet, bilge and water system (pressurized). I ran the drinking water dry through the faucets. Is there a good way to drain the tank completely? Did not see a dump valve. Without I'm hesitant to run RV antifreeze through there. Also - bilge access - want to make sure its completely dry. Suggestions?
Sorry for the newbie questions - we come from a beach cat background. Have done a bunch of crewing on bigger boats but this is our first craft with "systems".
Thanks much! JT More