My bayfield 25 was built in Bayfield Ont. 1n 1979. Now i need some help in replacing all halyards. Type of lines, size, etc,etc. While i'm at it, I wlll replace all running rigging so same question again. thank you. Deeds
new rigging
- Thread starter deeds
- Start date
- Status
BEEN THERE, DONE THAT
I recently replaced all running rigging on my "new" 1983 O'Day 23 that had been on land for 8 years, out in the weather, and uncovered. I just took a foot of the old spliced end with hardware to the rigger and asked for the current version of that line, etc. If no rigger close to you, West Marine has a rigging shop on each coast, and the east coast shop did a good job on a couple of halyards for me. I added a couple of feet to the halyards I had made, but in the future would add more. I now plan to run the halyards back to the cockpit so I may need more length. Good luck
I recently replaced all running rigging on my "new" 1983 O'Day 23 that had been on land for 8 years, out in the weather, and uncovered. I just took a foot of the old spliced end with hardware to the rigger and asked for the current version of that line, etc. If no rigger close to you, West Marine has a rigging shop on each coast, and the east coast shop did a good job on a couple of halyards for me. I added a couple of feet to the halyards I had made, but in the future would add more. I now plan to run the halyards back to the cockpit so I may need more length. Good luck
Or even better...
Click the chandlery tab here and go to rigging. We can spec all that (except the mainsheet) for about 4,000 boats, instantly, and add splices and shackles as needed. Using the chandlery here also supports the site. Thanks!
Click the chandlery tab here and go to rigging. We can spec all that (except the mainsheet) for about 4,000 boats, instantly, and add splices and shackles as needed. Using the chandlery here also supports the site. Thanks!
Abbot Baots
Abbot Boats in Sarnia could supply you every thing you need. Just take in all you old running rigging. Make shure you ajust for streach.
Abbot Boats in Sarnia could supply you every thing you need. Just take in all you old running rigging. Make shure you ajust for streach.
- Status