Need rigging specs for 1988 Hunter 33.5

[Walt Vogt]

We are the new owners of a 1988 33.5 which lacks any info on the proper specs for tunning the rigging. This makes me a bit timmid when the wind picks up and so I am really hoping that some good person out there could help me out because this pussyfoot'n a round is racking my nerves. Thanks- Walt

 

[Crazy Dave Condon]

several sources

Check the archives but if not there, call Hunter and ask for customer service. Ask for Gregg Emerson. for what it is worth, Seco South in St. Pete, FL made the rigging. Ask for Jean and she can probably help with your question too.Crazy Dave Condon

 

[Steve O.]

also...

Brion Toss Rigging is a good source. He has a website and a video which includes a section on tuning a Hunter rig. (See link below.) You have a conventional fractional rig vs. a B&R rig so its a little different.

 

[Gary Wyngarden]

Hunter 335 Rigging Specs

Walt,I have a 1992 335 with the original owners manual which includes a lot of spec sheets. If you'll give me a fax number or address, I'll be happy to send you copies.Gary WyngardenS/V ShibumiH335

 

[Walt Vogt]

Rigging 335

Thank you, Gary, for your offer to share the rigging specs for the Hunter 335. We don't have a home fax, but can get faxes at Copy Max Fax at 1-(503)-788-1350. Or, if you prefer you can mail to me at; 9804 SE Clatsop Street, Portland OR, 97266. I will gladly reimburse you for any cost you incur to do this. Hope you're enjoying your boat this summer, and if you get to Olympia, look us up at Fiddlehead Marina, in front of Anthony's restaurant, on B dock. Thanks again!Walt Vogt

 

[Gary Wyngarden]

In the mail

Walt,Have copied the specs and they are going in the mail today. You should have them tomorrow or Monday.Gary