Need more DIY advice

Status
Not open for further replies.
W

Wright Ellis

I have a fresh water leak in the forward end of the V berth on my 26.5 that must be coming from the anchor locker. After inspecting the sole of the locker, I noticed that the lay up had pinholes in it where the resin had not fully penetrated the fabric. I want to reline the whole locker. What's the best procedure?
 
R

Ralph Johnstone

Had the Same Problem ......................

......... with our 1999 H-310 during its first rainy winter. Solved the problem perfectly by pouring in two coats of West System epoxy (after scrupuously washing and drying the locker)and continuing to slosh it up and around the sides of the anchor locker until it started to gel. Never had a problem with leakage again. Best regards, s/v Island Hunter
 
Status
Not open for further replies.

Top Bottom