I am new to racing and plan to sail my 376 (1998) in some local regattas. I've just learned about PHRF ratings and when I went to fill out an application - whoa. I'd like to avoid getting out a tape measure and climbing the mast. Does anyone have a file with all of the needed info? I'm not the origonal owner. The boat is a stock model with the origonal 110 jib. I believe that the boat was offered with two keel options - mine is the shallow draft (5'). Please post here of email me directly. mark_laser@yahoo.com
- Status
Hunter 376 PHRF
The Kentucky Lake Sailing Club PHRF for a 376 is 117 plu 3 = 120. Your boat may be equipped differently, but that is a good general number for you if you are pretty stock.
The Kentucky Lake Sailing Club PHRF for a 376 is 117 plu 3 = 120. Your boat may be equipped differently, but that is a good general number for you if you are pretty stock.
This should give you....
the specs you need for your phrf rating. You will need to have the largest genoa size and the type of prop on your boat. I assume you are racing non-spinnaker. Years Built 1996-98 LOA 37' 3 in LWL 32' Beam 12' 7 in Draft 5' Displacement 15,000 lbs Ballast 5400 lbs Sail Area 847 sq ft Mast Height 60' 1 in Water Capacity 75 gal Fuel Capacity 35 gal Aux. Power 36 hp Yanmar Hull Speed 7.6 I 48' J 12' 11 in P 49' E 15' 3 in Capsize Ratio 2.03 Dips. Length Ratio T Keel Material Lead
the specs you need for your phrf rating. You will need to have the largest genoa size and the type of prop on your boat. I assume you are racing non-spinnaker. Years Built 1996-98 LOA 37' 3 in LWL 32' Beam 12' 7 in Draft 5' Displacement 15,000 lbs Ballast 5400 lbs Sail Area 847 sq ft Mast Height 60' 1 in Water Capacity 75 gal Fuel Capacity 35 gal Aux. Power 36 hp Yanmar Hull Speed 7.6 I 48' J 12' 11 in P 49' E 15' 3 in Capsize Ratio 2.03 Dips. Length Ratio T Keel Material Lead
- Status