Need a rigging list fit 1979 25.

[Jammin jr]

Can someone please foreword me or point me to a place where I can find the rigging specs for my 25?
1979 25 foot Cherubini with the kenyon 3550 mast at 28 feet. Also need to know the spreader length as mine are missing. It has the round tube spreaders.
Thanks so much

 

[Dennis Kitchen]

Hi JJ,
I'm rebuilding an '83 H25 and would love the same info but as yet haven't found it. What I can tell you is:
* my spreader tubes are 29 1/16 inch long, plus the cast tip, making a total about 30".
* In Hunter literature the mast is spec'd at 28' 8''. My extrusion is 28' 9 1/4" long. You say yours is 28'. Others I have seen say 28' 6" or 28'8", etc. To further complicate, my eyes and pins are all 5/16 hardware on top and 1/4 on bottom. All these ambiguities will make different rigging lengths. I wonder if any two were done the same.
Good luck with your search.
Dennis

 

[Jammin jr]

Thanks Dennis. Mine may be 28 + or - I have not measured it yet. The spreader info is a big help!

 

[Jammin jr]

Yippee!! I found all the standing rigging in s locker below decks.