Have a 34 Ft Morgan, 1966 CB Sloop with bent and cracked rudder post. The boat is equipped with Edson wheel steering, with quadrant on rudder post and cable steering link. I would perfer to buy a used rudder assembly to replace the damaged one. Please respond with: a--Source of replacement rudder assembly, or b--Recommendations for a shop to replace/repair the post (old one is cracked badly just above the rudder, and bent further up the shaft , or c--Any recommendations for a repair process. Boat Location: Reedsville Va (Just south of Potomac River on Ches Bay) Owner residence: Charlottesville Va Note: Existing post is bronze or brass. Regards Ron Jenkins