Morgan Classic 41 shaft and bearing help

Nov 6, 2014
1
Morgan 41 Classic Vava'u Tonga
Hi
WE have a Morgan Classic 41 we need to replace the mid bearing in the frame and the cutlass bearing and we might need a new shaft I have tried contacting Catalina and got no where not even a reply! Can anybody please tell me what these bearings are and where I can buy them
 
Mar 6, 2014
4
MORGAN o/i 41 DESTIN
bearing replacment

The Cutlass bearings come in standard sizes by measuring the inside diameter outside diameter and length you may obtain a new Cutlass bearing from propellerdepot.com. They only cost about $60.
The center bearing is a standard roller bearing and should have a number on the outer section of the case when you pull the bearing out and maybe ordered to any local auto store
don't forget to do an engine alignment once you have replaced all your bearings it takes little time will make your bearings last a lot longer.
In less your shaft is physically bent, or has excessive wear at the location of the shaft seal there is no reason to replace your shaft.
Good luck