Mississippi Sailors or ?

[SEADANCE]

I am having a very hard time finding a Yanmar Dealer/Distributor here in this area. I have covered boat yards, West Marine, Marine Supply, Ken's Marine and still can not find anyonne with anything. I found my mixing elbow at Johnsons Diesel in Woolmarket and other parts scattered around the coast. I am looking for the banjo bolt or bleeding screw that screw fuel line into the top of the injector.
Can any of our Mississippi Sailors recommend a place to go to...I don't mind the drive to Mobile or Louisiana for the parts or does anyonne here have a good website they could get these parts off of.

My thanks as always!

 

[Sailgunner]

John Deere

Did you try a John Deere Dealer?

 

[Rick Webb]

Try these Guys, Maybe

Have you asked Govert?


http://www.turnermarine.com/

 

[Gulf Coast18199]

Yanmar Parts

Have you tried these folks?

http://www.marinedieseldirect.com/

 

[SEADANCE]

John Deere

did try this one with no luck

 

[Scott B]

Yanmar dealer

From the Yanmar marine site,

Leasure Marine LLC 1926 Bienville Blvd.
39564 Ocean Springs MS
Mississippi Tel: 228 872 4415
Fax: 228 872 4506

 

[SEADANCE]

Leisure Marine

is now out of Grand Bay and having a hard time getting a hold of him, but left messages

 

[SEADANCE]

struck out

with Gover(Turner Marine)


but thank you for the info

 

[SEADANCE]

MARINE DIESEL

was great but I can not buy from them directly they are trying to find a dealer for me.

thank you this one looks good so far

 

[kloudie1]

Yanmar Parts

The Yanmar guys guard their territories carefully but here on Lake Ponchartrain, I deal with Laborde Power .. They are very knowledgable and will do business over the phone. Their link is attached. Hope this helps

 

[SEADANCE]

Jack pot

This place has them and is overnighting them for:
Blue Water Ships Stores of Alabama, Inc.
8103 Highway 59 South

Foley, AL 36535

251-943-4179

Here are a few others in case anyonne down South ever needs a Yanmar Distributor:

Ideal Marine out of Mobile, Alabama
251-432-8962

Laborde out of Louisiana:
1-800-628-9882


Thank you guys for your help..you helped me out quite a bit.
If you know of a good Yanmar Marine Diesel Engine Mechanic in my area please list(just in case)
thank you again..I can always count on this forum~B

 

[Rick Webb]

On the Next UTA

Have your husband talk to the AGE guys bet they can help you out.

 

[ChuckThomas]

try north shore marine in mandebille.

I dont have number but it should be in book. They can get anything. I had to have the banjo bolts last year. They had ability to get any part. BTW how is the boat after a year?

 

[Hermit Scott]

Yanmar Dealer

www.bluewatershipsstore.com
I just ordered about 40 parts from them today. They sell at the list prices.
I tried to order these parts from a north west distributor online and they cancelled my order spouting the territory thing.
Blue water had most of them in stock SEADANCE says theres one near you. If for some reason there is a problem there. There is one in Kemah and a location in Corpus Christi. 281-334-7583
I have a YSM-12 single cylinder. The rebuild parts cost $700, so far. I can get a rebuilt Chevey 350 longblock for $860 with a core exchange. This is my first sailboat so I am still getting used to the prices. I'm glad I have climbing gear so I can do my own standing rigging. Those prices are for the rich.

 

[Swandriver]

Thanks Seadance

I used Ideal Marine out of Mobile when Leasure Marine closed up. Thanks for the info on the place in Foley.

It was good to see you up and out the other day, you looked good. Hope you get all the sea time you need.

I finally got my cables replaced and took the Zydeco out for a short sea trial today after work. It was great to be on the water.

See you around the dock, and hi to the Clewless and the little ones.

 

[Andy1237]

Laborde Products

Da gents at Laborde Products always treated me right.

 

[SEADANCE]

mixing elbow and Banjo bolts

The new mixing elbow installation went well..too easy in fact..but I believe we got air inside somewhere..we bled the system a few times and still could not get her to start she wanted too but nothing..one of these banjo bolts broke in half and almost fell in...we were crossing our fingers to start her up and take her for a spin..not the case..my bolts and gaskets came from Blue water..they were just wonderful to deal with..highly recommend them!

As soon as the weather cools..I am painting the topside and putting in New Found Metals portlights as well as working on new sails.Still love and adore my time on the boat..I was sick for awhile and had some surgery but am slowly getting back to my old self again...thanks for asking..

Randy always good to see you and Mary Lou on the dock..hope to see you out this weekend.Glad the cable installation went smooth!