MD6A exhaust tube needed

[marcin_palacz]

Hello,

The exhaust tube in "Lotta" is leaking,
some 30 cm aft of the engine.
I need a new one.
Where can I get it ?

Or maybe somebody was left after repowering with such a tube
in a good condition ?

This is MD6A engine. I am in Poland.

Marcin
V1958 "Lotta"

 

[stevebirch2002]

You need to changeto a wet exhaust system. You need a Waterlock (Vetus
LP40), Exhaust Injection Part and about 3 metres of exhaust hose (38 -
42mm). The old exhaust system cannot be replaced as they do not make them
anymore and the stainless tubes inside will be very thin after 30 years!

Kind RegardsSteve Birch