Manual Bilge pump

[giani28582]

Hi
Can anyone tell me where to find the service kit for the manual pump
on declk aft of cocpit sole.
Mine has developed a hole in the rubber.
Gianni
Puffin 1554

 

[stevebirch2002]

Hi Gianni

The original bilge pump is worse tha useless (on the cockpit floor). Fit a new
one , whale etc. If yours is not on the cockpit floor then it has been fitted
after-market and you will need to find out the make & model then buy a kit
from
a local chandlery.

Regards

Steve Birch

At 03:18 03/03/03 +0000, you wrote:

 

[giani28582]

Thanks a bunch Steve!!!!
Cheers!
Gianni
Stephen Birch steve@... wrote:Hi Gianni

The original bilge pump is worse tha useless (on the cockpit floor). Fit a new
one , whale etc. If yours is not on the cockpit floor then it has been fitted
after-market and you will need to find out the make & model then buy a kit
from
a local chandlery.

Regards

Steve Birch

At 03:18 03/03/03 +0000, you wrote:

 

[lastgaspid]

Stephen, I've got V3233 and want to replace all the window gaskets and mouldings. Do you have an outlet for the correct size so I can continue to use the (glass) and the original holes?
I'm getting tired of the leaks and they have been puckied by prior owners. Its pretty unsightly and would sure clean up the old boat. Before I dive into the problem i want to have the replacements on hand.
thanks
Dave
V3233

 

[stevebirch2002]

Hi dave

The 3000 series Vega uses a different type of rubber moulding that is
almost impossible to source. I will ask in Sweden where I found the last
lot but its a 5/50 chance.

The otehr option is the new window set but they are a lot more expensive. I
will see if I can find some for you.

Regards

Steve birch

At 16:12 03/03/03 -0800, you wrote: