Looking for replacement part

Status
Not open for further replies.
2

25

.
Jun 6, 2004
4
- - lindenhurst, NY
I am looking for a steaming light bracket for a 77 O'Day25
 
RAD

RAD

.
Jun 3, 2004
2,330
Catalina 30 Bay Shore, N.Y.
got a picture? maybe you can use an aftermarket steaming light and are you from Lindenhurst, NY?
 
L

Larryhobb25

RAD said:
got a picture? maybe you can use an aftermarket steaming light and are you from Lindenhurst, NY?
Click to expand
Working on getting picture uploaded to this site. Have contacted D&R - left message and sent picture but they haven't responded back yet.

Yes, we are from Lindenhurst - Oday 25 teal stripe and furler.
 
Joe11688

Joe11688

.
Jan 24, 2005
4,881
Oday 222 Dighton, Ma.
Larryhobbs25 said:
I am looking for a steaming light bracket for a 77 O'Day25
Click to expand
Larry,
All you need is the Perko steaming light and Rudy has them in stock. I was at his store this morning and saw them hanging on the wall. The light has a rubber gasket on it that will fit the curvature of the front of your mast. No bracket is needed. All you need to do is drill a small hole through the mast about 2/3s of the way up for the marine duplex wire, plus two additional holes for the machine screws to hold it on. Here's Rudy's site: http://www.drmarine.com/. I just removed the steaming light from my mast yesterday along with the wire. I have internal halyards in my mast and one of the wires from the light got broken some how. For the few times that I've used my steaming light, it just isn't worth having. My boat came through with just an anchor light and I added the steaming light later. Good Luck!
Joe
 
Status
Not open for further replies.

Top Bottom