looking for Propeller for my Hunter 34 Model 1984

[Rigoletito]

I hope their is someone on the forum that might have changed the original propeler and is willing to sell the original, please e-Mail to try to make a deal Kind Regards

 

[Dave Amspacher]

I have a prop

I have the orginal prop from my 84' 34. I changed to a 3 blade prop. My e-mail is damspacher@aol.com. Drop me a line and we can talk.

 

[Rigoletito]

would like to buy your hunter 34 prop

dave thanks , please contact me and try a possible sale regardsljhp@prodigy.net.mxLuis James

 

[Dave Amspacher]

Prop

Luis,The prop I have is a 15 X 12. As I understand it Hunter used two differant props for this model boat. The 15 X 12 prop is the correct prop if you have a Westerbeke engine. The 15 X 15 prop is the correct prop if you have the Yanmar engine. If you have the Westerbeke engine I will gladly sell you the prop. This is the reason I changed props. Hunter did not have the correct prop installed for the Yanmar engine.So, let me know. I will sell my prop to you but I don't want to sell you the wrong prop which could possibly cause you engine problems in the future. This information I got from the archives of Hunterowners.com.

 

[Rigoletito]

my hunter has a westerbeke 21

FrogThankswhat would be the deal to buy this propeller from you ?regards

 

[Dave Amspacher]

Prop sale

Luis,I will continue this through E mail.Dave

 

[vinn]

prop info

I have a boat just like yours, and it to has a 15X12 prop, and i have no problems with it. it turns at 2250 for 5 knots, and 3500 showing 6.8 knots gps corrected with slack current. these specs change a few tenths, depending on the wind, and how much stuff you have on the bottom. I presume a 15X15 would load the engine alittle more, but give better bite into the wind. Ive read that a prop pitch should always be smaller than the diameter for top efficienty. could be hunter was pushing the limits!