I have a '84 Hunter 20 with port lights made by Gray Enterprises (now Bomar/Gray). I need to replace the foam gaskets. I have sent Bomar an email, but have not heard back. Does anyone know of a source for these gaskets. The ports are 5 3/4" x 12 7/8" and the gasket slot is about 1/4" wide. Any help would be appreciated.
- Status
- Not open for further replies.
K
Kenny
O-ring work?
Will an O-ring work if you get the circumference and then mold it in the gasket slot(we use yelloy 3M weather adhesive to hold gaskets ect. in place in the auto biz)? Maby some type of camper top or blower housing seal on a role but I prefer the rubber. Hope this helps. Kenny
Will an O-ring work if you get the circumference and then mold it in the gasket slot(we use yelloy 3M weather adhesive to hold gaskets ect. in place in the auto biz)? Maby some type of camper top or blower housing seal on a role but I prefer the rubber. Hope this helps. Kenny
C
Chuck Fort
ThriftyMariner.com
Try ThriftyMariner.com in Florida. You can even get get the whole portlight at discount price if other parts are going bad. I replace all 8 ports and a hatch for $400.
Try ThriftyMariner.com in Florida. You can even get get the whole portlight at discount price if other parts are going bad. I replace all 8 ports and a hatch for $400.
T
Thomas Berg
Question to Chuck Fort
I tried to reach somebody at Thrifty Marina in Florida per e-mail and also by phone without success. Do you have any suggestions on how I can reach them as I would also like to order some Ports for my Hunter 25.5'. Thank you Tom,
I tried to reach somebody at Thrifty Marina in Florida per e-mail and also by phone without success. Do you have any suggestions on how I can reach them as I would also like to order some Ports for my Hunter 25.5'. Thank you Tom,
C
Chuck Fort
ThriftyMariner.com
Here is the contact information. If you call the regular phone number, and you get the voice mail, try the cell phone number he gives on the voice mail. That is usually how I reached him. There is only one guy there so if he is out, you have to try another day. Phone / Fax Phone: 813-243-1378 Cell Phone: 813-625-8466 Internet Website: http://www.thriftymariner.com Thrifty Mariner Customer Support: thriftymariner@mindspring.com
Here is the contact information. If you call the regular phone number, and you get the voice mail, try the cell phone number he gives on the voice mail. That is usually how I reached him. There is only one guy there so if he is out, you have to try another day. Phone / Fax Phone: 813-243-1378 Cell Phone: 813-625-8466 Internet Website: http://www.thriftymariner.com Thrifty Mariner Customer Support: thriftymariner@mindspring.com
C
Chip Freund
I went to the source
Below is the note I got back from the folks at Pompanette, parent company to Gray. I will be ordering the gaskets directly. Jennifer in their customer service was quite helpful in setting me up with the correct part for my ports. Chip, Thank you for your reply. The gasket is part number GP904-09 and is sold for $3.00 per foot you can order on-line at www.pompanette.com Thank you and regards, Jennifer
Below is the note I got back from the folks at Pompanette, parent company to Gray. I will be ordering the gaskets directly. Jennifer in their customer service was quite helpful in setting me up with the correct part for my ports. Chip, Thank you for your reply. The gasket is part number GP904-09 and is sold for $3.00 per foot you can order on-line at www.pompanette.com Thank you and regards, Jennifer
C
Chip Freund
Thanks for the tip
Thanks for the tip. I have not yet placed my order. I will check on the Thrifty Mariner and save myself a couple of bucks.
Thanks for the tip. I have not yet placed my order. I will check on the Thrifty Mariner and save myself a couple of bucks.
- Status
- Not open for further replies.