Looking for a boat junkyard that has an older Hunter 33 for parts.

[azambella]

I need the plexiglass slide hatch for my 1982 Cherubini Hunter 33.

I am sure that there is some overlap in the model years so not just 1982

This is may last ditch effort before making one, so I am hoping someone may have seen one.

Making one will be challenging as the plexiglass is formed so......

Please let me if you have seen one of these boats for parts.

 

[higgs]

Usually those of us who have owned older boats have had to be creative to replace items, but this is one source you could check: https://www.sailorman.com/

 

[azambella]

Thanks,

I will give them a shot.

I have made many parts and repairs but bending 1/2 acrylic is not something I am looking forward to.

The stock is expensive and if it breaks during machining, OWCH!!!!

 

[dLj]

Thanks,

I will give them a shot.

I have made many parts and repairs but bending 1/2 acrylic is not something I am looking forward to.

The stock is expensive and if it breaks during machining, OWCH!!!!

It's not that bad to bend. You need to be patient and watch your temperatures closely. Slow even heating...

Depending upon the shape, you may be better served making a form. It can take longer making the correct form than actually bending the piece.

1/2" acrylic is thick enough you may need an oven. How big are your hatches?

If you post pictures of the pieces, could probably give you a better idea...

dj