Locker Door Tracks

Status
Not open for further replies.
L

Last Tango

I am looking for Locker door tracks for my Morgan does anyone know where I might find them. I have tried everything from RV Dealers to Home Depot with no luck here is a picture and the measurements.
 
T

Tom Hoppin

a do-it-yourself remedy

We replaced our hanging locker door tracks with standard aluminum "stock" from a Home Depot or similar retail hardware store (about $12 for a six foot length) . . the stock comes in one-half or three quarter inch track [three sided]: you can easily cut to length with a standard hack saw. Make holes for screws with a standard drill and countersink (screws should be as small as possible in order to keep their head size small, allowing the door to slide over the screw heads). Except for some oxidation the aluminum will hold up reasonably well in on-board conditions.
 
J

Jim

Door Tracks

I am also looking for sliding door tracks for my Morgan 323. I have looked at Home Depot and Lowes but sense there is a better way. A guy in the Ace Hardware on Metro (I think) said there was a place on Palm Blvd (RT 80 I think.) If you find them there could you post or reply to sailorjim@earthlink.net
 
B

Bob Tigar

Locker door track

I am assuming that you are referring to the tracks thast the panels slide in. This is the same stuff used for a tasmbour top on a roll top desk, etc. There are several supplies that provide supplies like this by mail order. In south Fla there are suppliers who provide materials to cabinet shops. Other qareas have the same thing. It is plastic, flexible and prob less than $1 a ft. Bob
 
Jun 19, 2004
365
Island Packet IP 32 99 Forked River, NJ
door tracks

How about this? I Googled "door track, and came up with what looks to be the right thing (albeit in aluminum). Click on the link... Jim
 
L

Lee on Jubilee

Sliding Locker Door Tracks

I found replacement tracks at a cabinet supplier and cabinet hardware supplier in Baltiore. The replacements work great but they are a lighter color.
 
Status
Not open for further replies.