little rubber stopper/bumpers

  • Thread starter Greg aboard 'BlueBerry'
  • Start date
Status
Not open for further replies.
G

Greg aboard 'BlueBerry'

ok, so I don't know what they are really called....BUT...on my L-37, there are MANY little rubber bumpers. They are made of soft rubber, have a whole in the middle a screw goes through, and are meant to limit travel and provide a soft landing. for example, there are four of them, one on each corner, under the cockpit aft locker lids. There are four under the gimbaled stove. there is one on the floorboard that stops the fore cabin door from opening too much. In other words, they are everywhere. Here's the problem...where can i buy new ones? I went to the hunter dealer, WM, hardward stores, home depot, etc...and i can't seem to locate them anywhere. Any ideas?
 
J

John Bannister

Rubber stopers

Pleas let me know as well as mine are getting rather worn. Last cound I need about 30 odd
 
M

Mickey Goodman

Rubber Bumpers

I just replaced all of mine on my Legend 37. Call Mike Thomas at Hunter and he will sell you them. I don't remember the number of bumpers, around 20 I think.
 
G

Greg aboard 'BlueBerry'

contact info?

I'm a little new at this, so my apologies....how do i get the contact information for "Mike Thomas at hunter"?
 
C

Chris Webb

How to contact Mike Thomas

Mike Thomas is in retail sales at Hunter. Phone number 1-800-7715556 extension 3015. Blueberry photos look terrific, by the way. Fair winds and following seas. Chris Webb
 
P

Paul Akers

I got mine

Greg. I bought mine this past spring direct from Hunter. These are more sun/weather resistant than the ones I got from Home Depot.
 
B

Bill O'Donovan

Try these

Any one of these will get you bumpers: Hunter Parts 800 771-5556 x 3015. Eddie Breeden, same number, x 3032. Mike Thomas, POB 1030 Alucha FL 32616
 
B

Bill

local hardware store has 'em

I use Brainerd Mfg 1/2 inch by 7/8 inch Plastic Bumpers, 4 to a package for $1.21 at my local hardware store. Brainerd part number 434XC.
 
Status
Not open for further replies.