lifeline stanchion
- Thread starter chutzpah
- Start date
- Status
Although I've never used them http://www.whitewatermarineinc.com/stanchion-base.html has been mentioned on this forum before.
For years I used and recommended Tops-In-Quality for anything stainless. I see on White Water's home page this note:
" SPECIAL NOTICE Tops In Quality is no longer accepting orders for custom stainless fabrications. Give us a call for your replacement stainless needs. "
Anybody know what happened to TIQ?
" SPECIAL NOTICE Tops In Quality is no longer accepting orders for custom stainless fabrications. Give us a call for your replacement stainless needs. "
Anybody know what happened to TIQ?
Check out Garhauer Marine. If they don't have the exact thing, you may be able to have them customize something for you.
I have 2 stanchions on hand. I purchased 4 for my 1979 37c and only used 2. They are the same height and lifeline holes are the same. Base plate is slightly different. Same welded wire reinforcement at the base, same size plate. The bolt pattern is slightly different
I plugged my old holes with Marine Tex, made a backing plate out of aluminum. (originals only have washers). I also purchased a small piece of Star board and cut new spacers. Since the base of the stanchion fits over a small ledge, this washer/plate fits under the stanchion plate. I removed and re bedded all of mine this spring. I believe have several starboard washer/plates left if you need some.
Let me know if you can use them, I can look for them.
50.00 for both stanchions, spacers and shipping. You can't beat that with a stick!
and you get an Oklahoma guarranty (if it breaks, you get to keep both pieces)
Jose
S/V Bonheur
I plugged my old holes with Marine Tex, made a backing plate out of aluminum. (originals only have washers). I also purchased a small piece of Star board and cut new spacers. Since the base of the stanchion fits over a small ledge, this washer/plate fits under the stanchion plate. I removed and re bedded all of mine this spring. I believe have several starboard washer/plates left if you need some.
Let me know if you can use them, I can look for them.
50.00 for both stanchions, spacers and shipping. You can't beat that with a stick!
and you get an Oklahoma guarranty (if it breaks, you get to keep both pieces)
Jose
S/V Bonheur
- Status