Has anyone been able to source plastic interior trim or make-up trim kits, for older Lewmar Portlights, as these are no longer available to purchase from Lewmar or Catalina directly. I have a 1996 Catalina 36 Mk II.
Lewmar Portlight plastic trim for pre 1997 models
- Thread starter melvyn.trigg
- Start date
- Status
You should be able to find these at catalinadirect.com
Go to Catalina's >30/ hatches and ports/ then choose gaskets or port lenses
By the way, if you are not already a member, you should consider joining the C36 association at www.C36ia.com There is a lot of information and help there!
Go to Catalina's >30/ hatches and ports/ then choose gaskets or port lenses
By the way, if you are not already a member, you should consider joining the C36 association at www.C36ia.com There is a lot of information and help there!
Catalina Direct had the last of these made by Lewmar a few years ago, I tried ordering some.
One alternative I considered was replacing the whole portlight, I'd found some online for around $200 USD.
Replacement parts were $95 for the lens, $35 for the gasket, 35- 40 for the screen, and the plastic trim on the inside was unavailable (priceless) so if you need the rest it doesn't seem so out landish. For a little more you can get the polished frames like the new boats.
http://www.p2marine.com/catalog/product_info.php?products_id=5483
Polished Stainless
http://www.p2marine.com/catalog/product_info.php?products_id=5484
One alternative I considered was replacing the whole portlight, I'd found some online for around $200 USD.
Replacement parts were $95 for the lens, $35 for the gasket, 35- 40 for the screen, and the plastic trim on the inside was unavailable (priceless) so if you need the rest it doesn't seem so out landish. For a little more you can get the polished frames like the new boats.
http://www.p2marine.com/catalog/product_info.php?products_id=5483
Polished Stainless
http://www.p2marine.com/catalog/product_info.php?products_id=5484
You can find the Old Standard lenses, and parts, at SelectPlastics.com
Tell Tony, Dave from SBO sent ya!
Tell Tony, Dave from SBO sent ya!
- Status