Lewmar hatch size 05 H33

[Scott B]

2005 Hunter 33, Does anyone know the size of the Lewmar opening hatches above the v-berth and salon. Boat's 3 hours away and a local Chandlery has boat show specials on the Oceanair screens. I believe they are Lewmar size 44, 20 3/16 x 20 3/16 outside frame size. There is also a slightly smaller size 40, 19 3/8 x 19 3/8, but it is not approved as an escape hatch, so assuming they used the 44?

 

[sail sfbay]

You might the hatch on this site: Hunter Parts (hunterowners.com). I would measure to be sure. Might be a nice day trip.

 

[Scott B]

You might the hatch on this site: Hunter Parts (hunterowners.com). I would measure to be sure. Might be a nice day trip.

Did check there and also actually RTFM. Both are indicating the smaller size. Just did a day trip to the boat in a blizzard last week, but shades did not come on sale until the Toronto Boat Show this week ( all virtual again ) so did not do any measurements. May actually wait now until spring and do another trip up and do an Amazon delivery to the location we may be going to WI. May be a win, win all round. ( shades, hoses etc etc )

 

[Herman18887]

I also have the 2005 H33. I think we have the Lewmar low profile 40. Did you get the Oceanair screen? What Oceanair part number did you get? Also I was thinking of replacing the acrylic. Does anyone know if it’s a MK1 or MK2? I can’t find a number on the acrylic.

 

[Scott B]

I bought the Oceanair Size 44 screen and fit perfectly. I drilled out the corners to fasten them, they mention this in the instructions. You can see the screw in the rounded corners in the pic. I used the beige interior trim screws from the boat. Work great.