Hello everyone,
I have a number of questions concerning the MD6A. They may
seem simple, but definitive answers from persons with
experience is better than than my own speculation... So here they
are.
1. What is a good Diesel lubricating oil? ( The instruction booklet
suggests service DS and Sae 30. I don't think DS service exists
any longer. The booklet was published in 1972.
2. The name of a product for lubricating the reverse gear?
3.Lubricating the reversing mechanism in the combi reducion
gear... Is Shell Alvania EP2 still available or what are its
alternatives?
4. Inhibiting oils.....Esso Rustban 623/ Shell Ensis oil 20.... are
they still produced ? What are other brands of the same
product....Mobil, Petro Canada?
5. Rustproofing Agent.... Esso Cutwell 40 and Shell Donax C are
they still around or have they been replaced by other products?
6. Should the injectors be removed and the cylinders sprayed
with inhibiting oil as the booklet suggests? This sounds difficult
to someone who has never seen a diesel engine before. Has
anyone had experience with this proceedure?
You replies may save me from rushing off in the wrong direction
and may assist me in appreciating the soul of the MD6A. I thank
you in advance and send my best regards...
Antonio
I have a number of questions concerning the MD6A. They may
seem simple, but definitive answers from persons with
experience is better than than my own speculation... So here they
are.
1. What is a good Diesel lubricating oil? ( The instruction booklet
suggests service DS and Sae 30. I don't think DS service exists
any longer. The booklet was published in 1972.
2. The name of a product for lubricating the reverse gear?
3.Lubricating the reversing mechanism in the combi reducion
gear... Is Shell Alvania EP2 still available or what are its
alternatives?
4. Inhibiting oils.....Esso Rustban 623/ Shell Ensis oil 20.... are
they still produced ? What are other brands of the same
product....Mobil, Petro Canada?
5. Rustproofing Agent.... Esso Cutwell 40 and Shell Donax C are
they still around or have they been replaced by other products?
6. Should the injectors be removed and the cylinders sprayed
with inhibiting oil as the booklet suggests? This sounds difficult
to someone who has never seen a diesel engine before. Has
anyone had experience with this proceedure?
You replies may save me from rushing off in the wrong direction
and may assist me in appreciating the soul of the MD6A. I thank
you in advance and send my best regards...
Antonio