last ? - Seacocks

Status
Not open for further replies.
T

tim howe

Was the 27 equipped with seacocks for the head or gate valves? I heard the later, is that possible?
 
S

schaefer

my 86 28.5

my 28.5 has gate valves...as a matter of fact the valve just broke in the open position a must be replace...has anyone tackled that job on the 28.5
 
B

Bill

Archives

Look up this subject and you will find sspecific details for the 28.5 including valve sizes etc. Not difficult.
 
M

Mark Slifko

sea valve for '83 27

My 1983 27 has the plastic sea valves. The sea valve is original and I will replace with bronze this spring. I am told the plastic sea valves will not pass an inspection from a survey any more. Never replace a gate valve with another gate valve. Hunter should never have used gate valves but I guess they did on some boats in some years.
 
L

Lee Henderson

gates on 27 1983

My 27 has gates at the head. They will be replaced next season
 
T

TOM MANALILI

WHO ARE YOU KIDDING

NO HUNTER CAME WITH SEACOCKS, THEY USED GATE VALVES, IF YOU HAVE A BOAT "MOST BOATS" UNLESS CUSTOM OR EXPENSIVE PROD'S CAME WITH GATE VALVES, IF YOU FIND ONE ON A HUNTER, IT WAS REPLACED BY THE ORIGINAL OWNER.
 
B

B Allison/Serendipity

Rpl Them

I had to replace all the gate valves. the 2" for the sink drain came apart in my hand...fortunately the boat was out of the water!
 
E

Emory Ellis

Replaced with Ball Valves

My boat had the original gate valves when purchased two years ago. Replaced both with bronze ball valves. Recommed it highly. The gate valves have a tendancy to come apart if not cycled on regular intervals. Hunter should never have used them.
 
Status
Not open for further replies.