Larger jibs/genoas on H23

[Bob Zanowicz]

I just bought an 1987 model. The previous owner set up a self tackingjib (90%). It works well and it is a brand new sail (Mack). My concern is that for where I sail the winds can be fluky and light so I am weighing some options:a) install luft tape (for the CDI furler) on the original jib (110%) and not use the self tacker.b) purchase a 120, 135 genoa.The boat also has a new fully battened main sail(Mack). I'm a bit concerned about the boat beingoverpowered so maybe a bigger jib/genoa is not the answer.If any H23 owners are out there with some with experience with this matter, I'd like to hear some feedback.ThanksBob

 

[mikeepp]

wait and see

I also sail an '87 H23. I have a new "racing" main (not full batten) (2 reef points) and multiple headsails. I change the headsails according to the weather and reef early and often. I'd think you should sail her a little next summer and get some experience with your current rags before spending money on sails or furling gear. My main touchs the backstay when I tack. I'd think your full batten main would also hit the backstay. Yes?

 

[Crazy Dave Condon]

furling

Bob;You have the old style wing keel. I have actually installed up to a 150 furling genoa as the conditions during the summer at smith mountain lake, va are the same. I strongly recommend the CDI system for the boat. You can adjust the sail according to the wind conditions.Good luck and if you need help installing, give me a call. You can purchase the system and sail through HOW store. Get my phone number from Hunter warranty. You will need to install genoa tracks too.Crazy Dave condon