I recently purchased an SR Mariner knot meter. Seeking advice as to the best location for the placement of the mechanical paddlewheel. Thanks Joe
- Status
- Jan 22, 2008
- 519
aft placement
I would suggest just off center by about a foot or so. When beaching, it will still be in the water, not in the sand. When pulled onto the trailer, it will be off to one side of the rollers, When grounding, the middle of the boat will strike first, perhaps saving the paddle from damage.
I would suggest just off center by about a foot or so. When beaching, it will still be in the water, not in the sand. When pulled onto the trailer, it will be off to one side of the rollers, When grounding, the middle of the boat will strike first, perhaps saving the paddle from damage.
- Status