1. Does anyone have any ideas where to start on keeping ice in there.
2. I have seen such items on the inter net as "lid insulators", is that the ticket.
3. Is the lid the source of me loosing my cool?
4. Is there a way to better insulate the box itself?
5. Is there such thing as a fridge/ice box conversion?
Jeff,
1. Start with BLOCK ice. Cubes have way too much surface area and melt almost immediately.
2. Insulation is the key, but the lid is only the start because it's the smallest in area of all the sides of the box, usually = to the bottom.
3. It's the start, because air can get in the edges of the top.
4. Yes, and there are many sources of insulating material. Hi tech is expensive, Home Depot isn't so expensive. You need to gain access to the sides and bottom of the box and insulate it. Some use spray in foam, but you need to be careful because it expands.
5. Yes, but if you're having trouble with ice, then you'll need to do two things if you want to add refrigeration to your boat: insulate and increase your house battery bank because electrical refrigeration takes a whopping 60 AH a day, more without insulation in your neck of the woods. You MUST exhibit a very good understanding of boat electrical systems if you're going to contemplate refrigeration.
I suggest wandering around
www.BoatUS.com and
www.catalina30.com
A West Marine catalog has a lot of different refrigeration machines, and you can review them on line. One of the more popular ones used by Catalina is the WAECO Adler Barbour "Cold Machines." Everyone with a boat should have a WM catalog - two: one at home, one on the boat.