Jabsco toilet seat/hinges

[SycloneDriver]

I broke the hinges on my Jabsco toilet seat in my 2008 Beneteau Oceanis 31. I like to keep repairs simple by using the original parts. I was aware that Jabsco has different hinges for the different bowl sizes. I have the full size bowl and ordered the appropriate hinge set, well I thought I did. So I put everything together only to discover that the seat is too far aft. After more time researching I discover that Jabsco has at least three different hinges set.

Now I decide to change course and find a seat at my local home improvement store. It is cheaper then the Jabsco hinges and comes with better hardware, in my opinion. It's also slow close, that's nice.

If you have full size Jabsco marine toilet of about 2008 generation the Mayfair 743sl fits perfectly.

 

[Stu Jackson]

My favorite marine store has always been my local hardware store. Since 1983 when I bought my first boat.

 

[JoeWhite]

SycloneDriver, mine was the smaller type seat. I found the exact hinges on a seat in the big box store. I bought the seat and removed the hinges and used on my boat seat. They were an exact match.

 

[Project_Mayhem]

I have a run of the mill manual Jabsco. I found that one of the major plumbing manufacturers, I believe it was Bemis, makes a seat for specifically for smaller bowls found on heads. It worked and wasn't $70

 

[kappykaplan]

Bemis

That's what I used to replace my seat when the hinges failed.

 

[CrispyCringle]

This is great info. Ive been putting off getting a new seat for our Jabsco since they run $80 or more. Ridiculous for a toilet seat. The Bemis TC50TTA should fit a Jabsco 37010 perfectly, and its only $29. Should get here today.

 

[kappykaplan]

This is great info.

You are quite welcome!