Peggy, We just came back from our first overnight of the season. First time I went to flush the toilet (Jabsco 29090-2000) it would not pull in flush water when the flush control lever was set on wet flush. When I poured water directly into the head, and flushed with lever in dry position, it worked fine. I checked that seacock was open, and disconnected intake line and blew through it to ensure that there was no blockage at throug-hull. All clear. Toilet is two years old, and was winterized last fall. I'd love some suggestions. Thanks very much.
- Status
Please read the recent posts in this forum before
asking about a problem. If you had, you'd have seen that you're the 3rd person to ask about the same problem in the last 5 days, and that it's been answered.
asking about a problem. If you had, you'd have seen that you're the 3rd person to ask about the same problem in the last 5 days, and that it's been answered.
- Status