This.do you want a hobby, or do you want to go boating?
I agree... it makes a difference on what size of boat we are referring to also.... a smaller boat that can be fixed up for 1500 or less and then be used to learn to sail on it, is a much better option than is fixing up an old decrepit 30'+ boat..... so that you can learn to sail.I think the original post was refering to a boat he already owns, perhaps one not used for a while and thus a bit "shop worn", but still one that he already owns.
I rebuilt a couple of small boats myself, one was a 14' runabout that washed up on hte marsh near our cottage (price was "free" after a bit of paperwork with the authorities) and all that could be reused was the hull and deck plus a few fittings. It cost me about $3K to rebuild her (including a "brand new" 3 year-old 9.9hp outboard) and we now have a boat that could not be replaced new for under $10K. If I sold her would I ever get back what I spent? Probably not (well ,I sold her to my Dad for $2500 the year after I rebuilt her), but we got a boat that fit our needs. Would I do it again?? Not sure, because as much as I like rebuilding boats..... I like using them more! Also, that little powerboat showed me that a powerboat can be fun... but I prefer sailing!
I also learned the truth in hte statement "The most expensive boats around are the ones labeled as 'FREE"....!"
there was a man with money.... that knew exactly what he wanted, built a trailer for it, and went out and got it. then spent lots of dollars to fix it up how he wanted it....Well.... Here's one guy who thinks it's worth it: http://www.pearsonariel.org/discussion/showthread.php?1972-Commander-147
Thank you for this information, after seeing the '65 that was restored, and it looks just like our boat on the inside, restoration it is!!!Take a look at the web site for STUART Marine, current builder of the MARINER, they have restored several older boats..... BEAUTIFUL! But, the 1967 they had for sale was priced at a very high $20K+ (more than she looked to be worth to me!). But a bit of sweat equity can produce a pretty nice restoration for far less than a newer boat.
But, in the long run, do you still feel this Mariner meets your needs? Do you like this boat? How much of the restoration work are you confident doing (as opposed to hiring someone to do)? How good are you with fiberglassing? How bad are the current interior structures (berths, countertops, cabinetry...) can you use the original parts as patterns for the new parts? Have a nearby source for marine plywood? Or alternatively, a source of good, quaility exterior-grade plywood? Really, Marine plywood and exterior-grade are almost the same, but Marine-grade has no voids, exterior often does, usually glues are basically the same. Id the job feel doable, then yes... it is worth it. If not, well......... it might be worth it to someone else.
Being in Holland, MI there are (I think??) several wooden boat experts nearby, and I suspect quality wood sources (after all, Holland used to be the home of CHRIS-CRAFT and S2 Yachts).
If you are willing to do the work using the right materials, and intend to keep this boat for a while..... I'd say restoration is well worth it! Just look around at the price of similar boats in good condition..... if you like this boat, and can do the restoration for no more than the replacement price of the boat.... it is worth it.
If the cost/value formula doesn't look attractive, it might be better to sell hte boat "as-is" to someone looking for a Mariner and willing to invest "sweat equity" in a boat if they can get it for a good price. Then shop for and buy a newer boat, or one in need of less restoration.
It's important to balance your skills and available time with your aspirations to be sailing. You seem to have the technical skills. I personally enjoy the rebuilding process as much as sailing. Since you have another boat to sail today, the process of "gutting and rebuilding" may be worth it to you - especially if you can get the boat for almost nothing.Ok I hate to beat this dead horse but I too am thinking of getting a fixer-upper. There is a 1983 39' O'day in my marina that has not moved off the stands in 15 years +. I currently have a 1983 Hunter 31' and have been looking to upgrade. I am very handy and my father used to produce custom (32 & 36') cats. It has standing water above the water in the back cabins. I do not have 40K plus to purchase a boat this size in good condition, however can apply sweat and money over a period of three years. I know most of the rigging and woodwork will need to be replaced along with electrical, lines and anything else rotted and all the black mold cleaned. The hull looks in good condition and the mast has roller furling Main. I just hate to see such a nice boat rot away and worried come this winter when everything freezes again. What are your thoughts?
You wouldn't possible have the link??Great thread about a guy that completely restored a Oday 27. I would suggest reading that thread and see if your up to the task.