Installing new holding tank

Status
Not open for further replies.
C

Colin

I am putiing in a Marine Toilet and need to put a holding tank in. All the hoses and the over-board pump are located in front cabin under the port berth. Does any one have idea on what holding tank to use & what do you think of the new Blader type?
 
P

Peggie Hall/HeadMistress

Bladders are nothing new

And they aren't a good choice for waste holding, for a number of reasons. Your best source for a tank to fit the space is Ronco Plastics...they make top quality tanks and have more than 400 shapes and sizes to choose from, including over 100 that are non-rectangular. And they install fittings in the sizes and locations yu specify when they make the tank. Their catalog is on their website at http://www.ronco-plastics.com Before you start this project you might want to take a look at the link below. Just a suggestion...:)
 
C

Colin

Don't get caught with that pump!!!

Don't get caught with that overboard pump linked into your holding tank, it will cost you mega bucks if the Coast Guard sees it. I am not a fan of flexible holding tanks, its one place where you really dont want a leak, let alone a spill.
 
M

Murray Beggs

Bladder Bad!

I recently repalced the bladder holding tank in my H30 with a rectangular one. No more leaks and I really beleive the smell is minimal too. If the bladder blows up on you (mine did) you will know what I mean
 
Status
Not open for further replies.