Installing bilge pump

[Grime]

I purchased a 1984 Starwind 22 MrkII a couple of weeks ago. I'm new to sailing and learning. I do have a couple of issues that need to be corrected before she goes back into the water. Working bilge pump, new wiring, bottom paint. I am trying to figure out where to install a bilge pump in my Starwind. The location where the one I have now sits under the forward settee locker. It's just sitting there with no outlet thru the hull. If anyone has a photo of their bilge pump location it would be greatly appreciated if you could send it to me. conagher60 at gmail dot com. Thanks so much for the replies. Any information on the Starwind 22 will be greatly appreciated.Grime

 

[darryle.cockerham@lbpa.com]

Bilge pump

I just bought a 1984 Starwind 22 MKIII. The bilge pump is located under the V-berth with an outlet to the starboard bow.

 

[Daivd Grimm]

Grime

Thanks for your reply. What I did on locating my bilge pump was to route it out the side of the cockpit so that the water, if any, would drain out the cockpit drains. I felt that going out the anchor locker drain would let water flow back into the bilge if it rained or when heeling. I didn't want to add another thru hull fitting.