Impeller Gasket for MD17C on 11.0

Jan 25, 2011
2,437
S2 11.0A Anacortes, WA
Call
1) marine parts express in ME
2) Vosbury Marine in Annapolis
3) French Creek Marina in NY
Also make sure the mating surfaces of the housing and cover are completely clean. The gasket is paper thin..if you're leaking water at the shaft area get that fixed ASAP as it can start filling the crankcase with raw water
 
May 8, 2010
15
S2 11.0A Racine, WI
I will check those dealers Mark. Thank You for the info.

I dont recognize any of that schematic you linked... Yikes that is my engine, but I never got that far into all that cooling system. I pretty much stopped at the Impeller.

It is the gasket (5/17) "The out of production" ones :)

http://www.marinepartseurope.com/en/volvo-penta-explodedview-7742230-26-15112.aspx

I have an aftermarket pump and used a company out west.

Is it on this schematic?

http://www.marinepartseurope.com/en/volvo-penta-explodedview-7742230-90-15204B.aspx

SC
 
Sep 6, 2011
435
I used that schematic and searched for Volvo Penta gaskets part number and came up with this. There are many places that came up with the search. This is just one of them. http://www.firstchoicemarine.com/p-55791-volvo-penta-gasket-819959.aspx Thanks for the help. Edited after I posted: I checked Ebay!!! I just bought 3 http://www.ebay.com/itm/New-Volvo-Penta-Gasket-Part-819959-/300916698859?pt=Boat_Parts_Accessories_Gear&hash=item4610086eeb&vxp=mtr
I always check there too once I have a part number. Keep a list as you go!) I bought my lower saildrive seals for a song there and also bought extra. Glad you found what you needed. ;-)
SC