Ignition switch?

Status
Not open for further replies.
Jun 2, 2004
80
Catalina 30TR Polk City, Iowa
I'm second owner on my "97" H26 so I don't know if remote engine controls were put on at the factory. The ignition switch is bad. There is no manufacturer's name on any of the parts that I can find. The switch has a 6415 stamped in one place and a 303 engraved in another. All wire leads come out of the unit which has no terminal posts. Any one have any idea who might have made this unit?
 
Jun 2, 2004
80
Catalina 30TR Polk City, Iowa
I'm second owner on my "97" H26 so I don't know if remote engine controls were put on at the factory. The ignition switch is bad. There is no manufacturer's name on any of the parts that I can find. The switch has a 6415 stamped in one place and a 303 engraved in another. All wire leads come out of the unit which has no terminal posts. Any one have any idea who might have made this unit?
 
Aug 9, 2005
772
Hunter 28.5 Palm Coast, FL
West marine or Hunter will have a replacement...

as will most auto parts stores,
 
Aug 9, 2005
772
Hunter 28.5 Palm Coast, FL
West marine or Hunter will have a replacement...

as will most auto parts stores,
 

MABell

.
Dec 9, 2003
232
Hunter 26 Orygun
Doubt it's factory

Maybe Hunter Dealer installed. Replacements are easy to find, but you need to know which wires are which.
 

MABell

.
Dec 9, 2003
232
Hunter 26 Orygun
Doubt it's factory

Maybe Hunter Dealer installed. Replacements are easy to find, but you need to know which wires are which.
 
Jun 1, 2004
243
Hunter 26 Lake Pueblo Colorado
Outboard?

I thought all the Water Ballast-H26s had OB motors. My 97 H26 has a Honda 9.9 outboard. Maybe look at the outboard manufactuer you have and see what they offer. Or you could post a photo, and that would give a better idea of what you are looking for. Good luck, happy sailing. We love ours, and now I am off to the lake. Chris
 
Jun 2, 2004
80
Catalina 30TR Polk City, Iowa
Found one

Picked up a six terminal switch at a local Boat sales place. Now all I have to do is figure out the corresponding wires. Thanks all of you for trying.
 
Status
Not open for further replies.