I need a toe rail for 2001 Beneteau 361

[JB Copeland]

The factory has changed the style of the toe rail. The new toe rail holes are drilled every 12". I need 17' to 18' of toe rail to fit a 2001 Beneteau 361 where the holes are drilled every 6 inches. I have contacted most of the large dealers, but I have had no luck finding the part.

Any suggestions or help will be appeciated for locating the part.

Thanks,
JB
jb@thecdb.com
615-443-2112, ext. 122

 

[Phil Herring]

Have you tried http://www.beneteauusa.com? They're you're best bet for either the part or the source. It's a tricky part and tough to ship; I doubt the dealers want any part of that.

 

[Philip_Oceanis 361]

Another possibility is directly the Beneteau factory in France (since you have an Oceanis series I could guess it's French built). They sometimes keep in stock old items that usually cannot be found in the dealers database (they have an online database).

 

[JB Copeland]

I have contacted Beneteau in SC. They are one's that told me about the part problem.

Thanks for you help.
JB

 

[JB Copeland]

Phillip,

Great idea.

Thanks for your help>
JB

 

[joker460]

don't know if you tried these guys. The have toerails for hunters. There is one model with 6" centers but I don't know if the profile would match yours.

http://www.crestaluminum.com/Main/Marine/Toerail.htm

This place may have it, give them a call

http://www.rigrite.com/Hardware/Toerail/Toerail.htm

Good Luck

 

[JB Copeland]

Thanks